dr|z3d
I see he's been working on his logo, orignal *chuckle*
dr|z3d
acetone: around and about?
not_bob
logo?
dr|z3d
yeah, logo. picture thing representing something. logo.
not_bob
Oh, that.
not_bob
Sorry, I was thinking about a turtle.
not_bob
And, I see the new logo on shmoogle.i2p.
dr|z3d
he's obviously got some talent, apepi.
not_bob
The search function works, and that's the main thing I care about.
dr|z3d
yup, search is good, seems to be running on a fast box.
not_bob
We've needed an i2p only search engine that works for a while now.
not_bob
Though, it does not seem to have indexed the entire network.
not_bob
As, some searches I've done should bring up more results than they do.
not_bob
But, indexing takes time.
not_bob
Alas, back offline for me.
orignal
do you see a dick on that logo? ))
orignal
he is running it at home
orignal
he said some decomissioned server with 8 cores and 64Gb of memory
orignal
acetone appears rarely after the release
orignal
I mean his release ))
dr|z3d
do me a favor, orignal, have a look at this and tell me if the translation is acceptable. you can rate it on a scale of 1-10 if you like, with 10 being perfect: git.skank.i2p/i2pplus/I2P.Plus/src/branch/master/README-ru.md
orignal
sec
orignal
remember that apepi is russian too
dr|z3d
yeah, I got that much.
orignal
russian jew
dr|z3d
oh, he's jewish?
orignal
left USSR in 80s
orignal
yes, his ethnicity is Jeweish
orignal
born in USSR
dr|z3d
that's interesting, because he's using what might be construed as an antisemitic trope for his logo.
orignal
it's just irony
orignal
and trolling of antisemits
orignal
"для мягкого форка реализации" bad
orignal
should be formulated better
orignal
"Взломать I2P" what's that?
dr|z3d
how would you express it?
orignal
bot sure
orignal
just sounds bad
orignal
let me think
dr|z3d
Soft fork implmentation.. dunno how you'd best express that in Russian.
orignal
"Чтобы получить ветвь разработки из системы управления версиями"
dr|z3d
To grab the development branch...?
orignal
but what is developemnt branch ? master?
dr|z3d
no development branch is the pre-release dev builds.
orignal
"Скачайте ветку master из репозитария gitlab.com/i2p.plus/I2P.Plus/"
dr|z3d
rolling release, that sort of thing. bleeding edge.
orignal
I would say like this
orignal
"На ненормированных системах " what's that?
orignal
"ненормаированный" usually means unlimited
orignal
or endless
orignal
неподписанное - не подписанное
dr|z3d
irregular I've got here as the translation, probably means non-standard or legacy or something.
orignal
"Это исходный код для мягкого форка реализации I2P на Java." I would say "Это исходный код для усовершенствованной реализации I2P на Java"
orignal
say then "На прочих системах"
dr|z3d
that's changing the meaning, though.
dr|z3d
is there no standard way in Russian to say "soft fork"
orignal
no
orignal
we don't have such terminology
dr|z3d
I guess we'd just want to say "an alternative Java I2P implementation" then?
orignal
"усоврешневствонный" is closest
orignal
then say "альтернативной реализации I2P на Java"
orignal
eaxctly what you say
dr|z3d
Это исходный код для альтернативной реализации i2p на Java is what I've got here. correct?
orignal
without "для"
orignal
"Это исходный код альтернативной реализации I2P на Java"
dr|z3d
ok, perfect, thanks. that's changed. what else needs changing?
orignal
<orignal> неподписанное - не подписанное
dr|z3d
ok, fixed, thanks.
orignal
"на ненормаированных" - "на прочих"
orignal
and about development branch
orignal
"получить" sounds very non-Russian in this context
orignal
because "получить" means "receive" not "get"
dr|z3d
I guess we want download there then?
orignal
yes
dr|z3d
Чтобы скачать I2P+ через Git: ?
orignal
you should use verb "скачать"
orignal
yes
dr|z3d
ok, thanks
orignal
that's the right phrase
dr|z3d
not a hugely catastrophic translation then, thanks for buffing it up :)
orignal
yes, you translation sounds fair and understandable
orignal
just sounded non-Russian ))
orignal
but many Russian amoung millenials really speak like this
dr|z3d
great. if it can be understood with minimal head scratching, that's the main thing.
dr|z3d
we're now at 100% coverage in the I2P+ console and webapps.. not_bob_afk helped with the help section.. hopefully nothing too leftfield there, either, but I guess we'll find out if we have any Russian I2P+ users that care enough to report issues.
dr|z3d
not too shabby, 27 console languages, all at 100%.
orignal
I remeber someone used it don't remeber who
dr|z3d
ok, you can let apepi know shmoogle has been restored to I2P+ if you want, orignal
RN
yo dr!
RN
so the Klingon and Ferengi translations are done too?
dr|z3d
I refer you to the comment I made re Esperanto previously, RN :)
RN
LOL... so no translation to "Kenny" from SouthPark?
dr|z3d
No, no whistling Spanish, either.
RN
pidgin bra?
RN
I guess we should also add "Boomhower" from King of the Hill to the wish list
dr|z3d
you're doing these translations are you?
orignal
told him
dr|z3d
thanks o.
orignal
btw, did you guess where he lives?
dr|z3d
in your condo in the cupboard?
orignal
warm
orignal
on the next street
dr|z3d
oh, you share the same bed?
dr|z3d
aha.
orignal
seriously
dr|z3d
there we go. I thought he might be local to you.
orignal
another Toronto guy
orignal
<Most> <mauzer> тихо в лесу
orignal
<Most> <mauzer> только не спят дрозды
orignal
<Most> <mauzer> знают дрозды
orignal
<Most> <Oceana> Надо продолжить спать
orignal
<Most> <mauzer> что получат..
orignal
<Most> <mauzer> внимание вопрос!
orignal
dr|z3d it's aboyut you ))
dr|z3d
someone on crack over there again?
orignal
discussion on ru at ilita
dr|z3d
I couldn't make any sense of those comments, what's the topic?
orignal
дрозд is you, right?
dr|z3d
you know that, drozd.
orignal
somebody remember something childish
dr|z3d
there wasn't a whole lot of sense in what you posted.
dr|z3d
ah, nursery rhymes.
orignal
what's the right rythm
orignal
<orignal> Sarda а ты знаешь что получат дрозды?))
orignal
<Most2> .<Sarda> Нет
orignal
<orignal> а подумай что рифмуется ))
orignal
<Most2> .<Sarda> Блин
orignal
<Most2> .<Sarda> Сам ты
orignal
<Most2> .<Sarda> Грозды
orignal
<Most2> .<Sarda> )
orignal
<Most> <mauzer> вот и не спят дрозды
orignal
<Most2> .<Sarda> Бразды
orignal
Sarda also doesn't know because she is not Russian
orignal
she is Yakutian
orignal
hence this puzzle is complicated
dr|z3d
always space for a Yakut translation in I2P+ if she wants to provide one :)
RN
♪ ♫ four and twenty black birds baked in a pie ♫ ♪
orignal
what for? everbody in Russia is supposed to know Russian
orignal
even if thier ethnicity is not Russian
dr|z3d
ok, nevermind then. tell her we have her covered in I2P+.
orignal
Most> <Finn> Блядь,ну что ж это за слово такое?
orignal
lol
orignal
this guy is Belarussian ))
orignal
also doesn't know
dr|z3d
clueless, or as you'd say in Russian, невежественный
orignal
ofc it's a swearing ))
orignal
no, just non-native Russian
dr|z3d
*swear word / expletive
dr|z3d
what up RTP
RTP
heyyy
RTP
working on making a server
RTP
hows things?
dr|z3d
not bad, thanks. not bad.
dr|z3d
preparing for new I2P/I2P+ release probably on Monday.
RTP
ahhh very nice! :)
dr|z3d
also, tube.i2p now working again. and natter.i2p if you missed that. teddit.i2p currently being fucked over by reddit, like most other 3rd party reddit clients.
RTP
awesome... I was trying to use natter.i2p a few weeks back I think it was. Glad to hear things are back.
dr|z3d
twitter/x making it harder, I guess they're trying to thwart 3rd party clients, just like reddit.
RTP
currently on the search for open source firmware supported ethernet chips if anyone has any suggestions
RTP
yeah the whole "we must stop the bots" thing is bs if you ask me... just another way to identify users and their searches linking to username
dr|z3d
mostly they want to serve ads.
dr|z3d
1. Ethernet FMC (Field-Programmable Mezzanine Card): The Ethernet FMC is an open-source hardware module that provides Ethernet connectivity. It is designed to work with FPGA (Field-Programmable Gate Array) boards and offers support for various Ethernet protocols and speeds.
dr|z3d
2. Open Ethernet Lite: Open Ethernet Lite is an open-source Ethernet MAC (Media Access Control) IP core. It is designed to be used with FPGA boards and supports full-duplex communication at various Ethernet speeds. The source code and documentation are available on GitHub.
dr|z3d
3. LiteEth: LiteEth is an open-source Ethernet IP core that supports full-duplex communication. It is designed to be easily integrated into FPGA designs and offers support for different Ethernet speeds and protocols. The source code and documentation can be found on GitHub.
dr|z3d
4. OpenCores Ethernet IP: OpenCores provides multiple open-source Ethernet IP cores that can be used for FPGA projects. These cores support different Ethernet speeds and protocols, and the source code is available for customization and integration.
RTP
and my thought has been: Elon wanted twitter to train AI and build the largest centralized self promotion server IMO. Ever since he purchased it, flooded with his interests... not surprising or anything
dr|z3d
his ego got in the way of business sense.
RTP
for sure. I never understand how ppl think 1 person is going to be more independent than several - consolidating ownership under 1 person means there is now only 1 person that needs to be manipulated to control the platform... not that I supported the previous board much more.
dr|z3d
if you meant adapters when you requested info on chips:
dr|z3d
1. Intel Gigabit Ethernet Adapters: Intel is known for providing good Linux support and open-source drivers for their Ethernet adapters. They offer a range of Gigabit Ethernet adapters, such as Intel Gigabit CT Desktop Adapter and Intel PRO/1000 PT Dual Port Server Adapter.
dr|z3d
2. Atheros/Qualcomm based adapters: Atheros/Qualcomm chips are known for their good Linux compatibility and open-source firmware support. Some popular models include Atheros AR8161, AR8162, and AR8163-based adapters.
dr|z3d
3. Realtek Ethernet Adapters: Realtek provides a wide range of Ethernet adapters, and many of them have Linux support with open-source firmware. Some popular models include RTL8169 and RTL8111-based adapters.
dr|z3d
4. Broadcom-based adapters: Broadcom offers Ethernet adapters that are compatible with Linux and have open-source firmware support. Models like Broadcom NetXtreme and Broadcom Crystal HD series are commonly used.
dr|z3d
5. ThinkPenguin Wireless & Ethernet Adapters: ThinkPenguin is a company that specializes in Linux-compatible hardware. They offer a variety of Ethernet adapters with open-source firmware, such as the ThinkPenguin TPE-N150USB and TPE-N300USB.
RTP
ah thanks for the info. I was just about to search for it. :-P
RTP
atheros has always been good to me
RTP
working on getting hardware together but hoping to get an i2p site eventually on it is the goal
dr|z3d
you can always run railroad in the meantime, just to see how it works.
RTP
actually have been considering giving that a whirl to start off with
dr|z3d
easy to install, easy to remove :)
RTP
I've actually been reading it :)
dr|z3d
*thumbs up*
dr|z3d
welcome, China!
China
Hello
China
```WOW
dr|z3d
I've always wanted to say that.
dr|z3d
:)
dr|z3d
what's new and different, China?
China
Dear Sir are you the author of i2+? I have installed i2p+ using java to access i2p+ across borders by binding wireguard address, but I have many VPS I want to component them into a huge network, is it of any use?
dr|z3d
You've come to the right place, China. Yes, I'm the lead developer for I2P+. Shouldn't be a problem running it on multiple VPS platforms, it runs fine already on many.
China
That's really great. i2p+ has so few Chinese tutorials that I don't even know where I should go to learn.
dr|z3d
Have you looked in the I2P+ console at the /help/ section?
dr|z3d
as far as deployment is concerned, it's pretty straightforward.
China
Please give me help to make them better allowable, I currently have (US) (Germany) (Sweden) (Switzerland) (London) (Canada) VPS's and I have i2p+ installed on all of them individually but I'm not sure how I'm supposed to component them into one large network (does this help with privacy and security)?
dr|z3d
well, you can assign a family name to all the routers which will indicate they're part of a group, but other than that, the network itself is one large network, so you don't need to do much more.
dr|z3d
if you want to run services on all the routers, you can multihome them for better redundancy and more security.
RN
you might want to look into ssh forwarding over I2P
dr|z3d
multihoming means that the same b32 address is assigned to a service running on multiple routers. so you could have china.i2p, let's say a webserver, running on 4 different servers for example. makes it harder to identify the location of the server for anyone trying really hard, and it makes the service less prone to downtime when you restart one of the routers.
China
I'm checking out instructions on how I can multiple attribute for them?
dr|z3d
you just specify the same .dat key for all servers you want to share the same address, in the tunnel manager.
China
:7667/ ?
dr|z3d
no, that's your router console access.
dr|z3d
:7658 is your default webserver local port.
China
ok
dr|z3d
if you want to be able to access all the consoles via ssh, you can do that.
China
I access the console by binding to the wireguard's address. Ssh is too much of a pain in the ass.
dr|z3d
if you want to access them securely, you probably want to create a client ssh tunnel in your local router, and then server ssh tunnels on the remote routers.
dr|z3d
sure, you should be able to do that.
dr|z3d
assuming you can access ip:port for the remote router over wireguard, you should be able to access a remote route with ip:7667
dr|z3d
you'll also need to ensure that the remote router is listening on that ip address.
China
I'm working on how to set them up.
China
Yes that's how I have it set up, I'm accessing the web interface
China
wirerguard 10.0.66.1 10.0.66.1:7667 = ok
dr|z3d
so it's already working to access remote web consoles?
China
Yes
dr|z3d
ok, great, sounds like you're all set.
China
I just don't understand how to set it up to be more secure.
dr|z3d
is the wireguard remote ip accessible to anyone else?
China
Only I have access to wireguard.
dr|z3d
also, /configui will allow you to configure a password for console access.
dr|z3d
ok, great, then it should already be pretty secure assuming you haven't got the console listening on 0.0.0.0 with all ports visible and open from the internet :)
China
Are there any important security settings?
dr|z3d
important is a sensible firewall policy.
dr|z3d
for extra peace of mind, configure a password on each remote console.
dr|z3d
if you're allowing 7667 in your remote firewall, make sure you're only allowing access from wireguard.
China
~/configui user passwd ?
China
ok
dr|z3d
also, if you're running services, web servers etc, make sure they're locked down and secure. avoid wordpress and other software with regular vulnerabilities.
dr|z3d
not ~/configui
dr|z3d
:7667/configui
dr|z3d
in the web console.
China
Yes I am looking at how they are set up
dr|z3d
username, password. then when you first request the console, you'll be requested for a password. you can reset (remove) the password by removing the relevant line in ~./i2p/router.config if you forget it.
China
Is it possible to do a series of settings and modifications via terminal under ssh?
dr|z3d
yes, you can edit the router.config file.
dr|z3d
(for example)
China
I see all the news in gibberish.
dr|z3d
oh?
dr|z3d
gibberish being english or something else?
China
(????????????????????????????)
dr|z3d
on /news ?
China
Jun 25, 2023 I2P 2.3.0 ??? - ????????????DTG APIidk????? CVE-2023-36325 ???? CVE-2023-36325 ????????????????????? ????????? messageID ? I2NP ?????? messageID ??????? ???????????????????????????? ???????????????????? ??????????????????? ??????????? messageID ????????????????????????? ???????????????????????????????????????????????????????????????????? ????????????????????????????????????????????????????? ???? Java I2
China
????????????????????????????? ???? netDb ????????????????????????? not_bob ???????hosts?????notbob.i2p?ramble.i2p?????????????????????????? ????????????????IP??????????????????? ? sybil ???????????????????????????????????????????????????? ??????????????????????????????????API???????GUI(DTG)????? ???????????????????????????????????????????????????????? ???????????????????????
China
Oct 12, 2022 ???????zzz????????????????????????? SSU2 ???????I2P??????????divs.exchange?Konrad????StormyCloud?Dustin???
China
Aug 22, 2022 1.9.0 ??zzz??????????????????????????UDP???? "SSU2" ????????????????????????? ????????ARM??????????????????????? ?????????????????????????????? ??????????? ?????11?????????????????????? ?????????????????????????????? ??????????????????????????????????????????????????????????????????????????????????
China
It's all this garbage.
dr|z3d
debian based distro?
China
Yes debian12
China
AMD
dr|z3d
try this: apt install fonts-noto fonts-noto-cjk fonts-noto-cjk-extra
dr|z3d
see if that helps.
dr|z3d
alternatively, try selecting the alternative display font on /configui .. that may also help.
China
ok
dr|z3d
you may need to restart your browser if you're trying out noto sans.
China
ok
dr|z3d
if either solution works, or doesn't, let me know.
China
I'm trying. I'll let you know how it goes.
dr|z3d
*thumbs up*
dr|z3d
Don't forget to configure I2P+ updates, China, on /configupdate
China1
~~~/configupdate What should I write here?
dr|z3d
you want to enable unsigned updates.
dr|z3d
and you can either leave the default in place for the url, or copy and paste the /dev/ url.
China1
How do I send you a picture?
dr|z3d
you probably also want to configure updates to download, install and restart. you can set a check interval, too. set that to maybe 36 hours or more if you're on the /dev/ update path and don't want your router restarting every day.
China1
It's the same as updating with two options I don't know which one to turn on which is off by default
China1
The first one (the update is being done with a signed development version, but the URL is unlinked) and the second one is being done with an unsigned development version with the update URL (http://skank.i2p/i2pupdate.zip) Which one should I choose?
dr|z3d
-121+ uploaded, for + users on the /dev/ update path.
China1
The first one (the update is being done with a signed development version, but the URL is unlinked) and the second one is being done with an unsigned development version with the update URL (http://skank.i2p/i2pupdate.zip) Which one should I choose?
dr|z3d
The second. unsigned update.
dr|z3d
you can opt for development updates there if you want, the info box gives you the alternative URL. make sure the box is ticked.
China1
Okay I understand.
China1
I'm using wireguard to remotely listen to i2p+ on the vps, so I need to change those addresses 127.0.0.1-10.0.66.1
dr|z3d
you just want to add an additional listening address for your console.
China1
# Last saved: Dec 16, 2023, 10:56 PM
China1
clientApp.0.args=7657 ::1,10.0.6.1 -s 7667 ::1,10.0.6.1 ./webapps/
dr|z3d
-s = https
China1
sudo nano /home/i2p/.i2p/clients.config.d/00-net.i2p.router.web.RouterConsoleRunner-clients.config
China1
I see that there is no https in the default, I just changed the address 127.0.0.1 -10.0.6.1, I didn't bother to change any of the other ones
dr|z3d
-s 7667 127.0.0.1 -s 10.0.6.1 7667
dr|z3d
that should I think give you both https access via localhost and 10.0.6.1 on ipv4.
dr|z3d
the default implements https, that's 7667.
China1
clientApp.0.args=7657 ::1,127.0.0.1 -s 7667 ::1,10.0.6.1 ./webapps/ ?
dr|z3d
::1 isn't required if you're not accessing the console over ipv6.
China1
I don't have IPV6.
dr|z3d
-s 7667 127.0.0.1 -s 10.0.6.1 7667
dr|z3d
let me take a look at my config. one sec.
China1
ok
dr|z3d
you should be editing the file 00-net.i2p.router.web.RouterConsoleRunner-clients.config in ~/.i2p/clients.config.d
dr|z3d
try this: clientApp.0.args=-s 7667 127.0.0.1 -s 10.0.6.1 ./webapps/
dr|z3d
that should give you access via :7667 on both localhost (127.0.0.1) and 10.0.6.1
dr|z3d
actually, sorry.
dr|z3d
clientApp.0.args=-s 7667 127.0.0.1 -s 10.0.6.1 7667 ./webapps/
dr|z3d
that should be correct I think.
China1
OK I'll try it.
dr|z3d
did the news gibberish get fixed?
China1
Yes fixed it, no more mess at the moment
China1
What's the problem?
China1
SAM Application Bridge
China1
What's this for?
China1
What is i2cp doing in there, I don't really understand this function his port is 7654
dr|z3d
external applications.
dr|z3d
like i2pchat for example.
China1
I will organize all the questions into Chinese so that more people can use it
China1
I get it.
dr|z3d
have you checked the help section?
dr|z3d
i2cp is an altnernative method to communicating with external applications. some apps use SAM, some use i2cp.
dr|z3d
SAM（简单匿名消息）是一种协议，它允许使用任何编程语言编写的客户端应用程序通过 I2P 进行通信，方法是使用与 I2P 路由器的基于socket的接口。 有关详细信息，请参阅 在线文档。
dr|z3d
from /help/glossary
dr|z3d
I2P 客户端协议 (I2CP) 允许外部应用程序（客户端）通过单个 TCP 连接与 I2P 进行通信，默认情况下使用端口 7654。有关更多信息，请参阅 在线文档。
China1
ok
dr|z3d
review all the info in /help/ before you write up a help guide. if you still have unanswered questions you think could help other people, let me know and I'll think about adding them.
dr|z3d
the faq page may be the best place for additional questions.
China1
Yes I'm looking at them carefully and certified, i2p in Chinese I see a lot of people asking how to go about installing it and no one coming to teach them how to install it, which is too bad, I'm going to have to put together a detailed fool proof installation step by step for them.
dr|z3d
if you can improve on that for the chinese audience, great, I'll add your guide to the site.
China1
Ok I'll take a few days to finish it and it will take some of your replies to do so. Of course if you are willing to not mind the trouble.
orignal
afaik eveything uses I2CP in Java I2P
China1
I'm creating a socks5 tunnel, and when adding the tunnel I see that there are too many options, based on the premise of security, how should I go about setting up what features need to be turned on and what features need to be turned off
orignal
<memo> "пизды" - но это очень удовлетворительная форма наказания
orignal
finally
China1
？
orignal
dr|z3d knows
China1
He's not here?
China1
@dr|z3d
dr|z3d
what up, China1?
dr|z3d
zzz: fwiw, with the native folder removed from the sqlite-jdbc jar file, we have a 233K jar.
dr|z3d
even the conversation is encrypted on ilita, orignal
zzz
you can take out what you think isn't necessary but almost certainly needs the native stuff to work
dr|z3d
oh, sure, I was just saying following on from yesterday that the native stuff could be delivered separately if you're worried about the size of the jar.
zzz
sure, but my larger point is JDBC + native isn't remotely appropriate for use in canon. It's fine for plugins
dr|z3d
ok
zzz
the other problem is there's no way now for a plugin to replace the default naming service
dr|z3d
probably doesn't need to, if you're talking about adding missing functionality to android.
zzz
this is to get testing before it goes to android, because I hate testing on android
orignal
encrypted?
dr|z3d
elliptic, orignal, meaning unclear.
orignal
got what's gonna happen with thrushes in that puzzle?
orignal
))
dr|z3d
they get fed to the cat? I dunno.
orignal
"дроздЫ получат пиздЫ" ))
dr|z3d
lol
dr|z3d
They can stay over on ilita, thanks.
orignal
but only ethincal Russians found proper word ))
dr|z3d
zzz: those new hashes and ips you pushed to the blocklist, what are the offenses?
not_bob
I use i2pd on android.