~AreEnn
~R4SAS
~orignal
~villain
&N00B
+Xeha
+relaybot
DUHOVKIN
Guest8889
HackerMan
Most2
Nausicaa
Ruskoye_911
Vort
`
acetone_
anon3
b3t4f4c3
fidoid_
nemiga
not_bob_afk
plap
poriori
profetikla
soos
teeth
tensor
un
weko_
whothefuckami
ian
ok great, thanks again :)
orignal
ian please grab lates version of i2pd and gostcoin.i2p/apitest.cpp
orignal
more clear code with sync oprations
orignal
до кучи вычистил этом дурацкий код хаген в addressbook
ian
original: I can receive from http website (its working on windows). How can I publish http website now? So it works both ways. Can you give me a sample code with those functions please?
orignal
publishing is more complicated
orignal
either you have to link against libi2pd_client and use I2PServerTunnelHTTP
orignal
or if you want to do it youself there and use method AcceptStreams of ClientDestination
orignal
once an incoming stream come that acceptor will be invoked and you can start reading data from that stream
orignal
so, all sample code it inside I2pServerTunnelHTTP in I2PTunnel.cpp
crcr23
original: Understood, I'll try doing it. Thanks.
crcr23
connected on my laptop on here, it's still me ian btw.
ian
localDest = std::make_shared<i2p::client::RunnableClientDestination>(keys, true, ¶ms);
ian
myServerTunnel = std::make_unique<i2p::client::I2PServerTunnel>("i2priceservice", "127.0.0.1", 1337, localDest);
ian
myServerTunnel->Start();
ian
Hi original I hope you are doing well. Is that the wrong way to run server tunnel? I'm getting Local destiation doesn't exist, dropped errors in console log.
ian
it looks like the b32 address, isn't registered on the network, registering?
orignal
linked libi2pd_client?
orignal
you have to maintain dests in ClientContext
orignal
you must initialize it and run
ian
Yes I linked the .a lib in cmake file.
orignal
look at ClientContext::LoadTunnels
orignal
it will give you an idea how you should create such tunnels
orignal
or look at SAM.cpp
orignal
how they are created through ClientConetext
orignal
back to you problem maybe you server tunnel didn't build tunnels
orignal
and can't publish it's LeaseSet
orignal
e.g. you have to wait for a while
crcr23
okay I see thanks again, I think I didn't create it correctly, I see in ClientContext file now. I'll also try to wait a while to see if the error doesn't happen.
orignal
you should look into log about publishing LeaseSets
orignal
if it was successive or nort
ian
16:26:29@196/info - Garlic: LeaseSet update confirmed
ian
16:26:31@196/error - I2PTunnel: Connect error: No connection could be made because the target machine actively refused it
ian
original: thanks I think it's working now, but what the second error means? I didn't add more code after start(), I need to add acceptstream etc?
ian
I started local destination first, then sleep 40 sec, then started server tunnel, and it looks working now, but I don't know what the second error means.
Orion
всё же вылетел. Лог за последние 20 минут работы paste.i2pd.xyz/?76bdc7d69dc0d148#5Ht6SpF8jXo7JTuS4LoUj8LEp4BxJTJwzAc1ENXi7fvy
crcr23
original: for AcceptStreams(), I need to pass a stream, its from CreateStream with the destination address? I understood your client code, but for server side I don't understand how to do the AcceptStreams.
Orion
наверное из-за openssl 3.2. В логе ядра ошибка Nov 9 17:18:02 kernel: [233737.393967] SSU2[1848]: segfault at 7fa44403d020 ip 00007fa4574f4ba7 sp 00007fa44fffe2a0 error 4 in libcrypto.so.3[7fa4572b3000+324000]
orignal
так не лог надо а стек
orignal
crcr23 for AcceptStream you must pass a functor that taked stream as param
orignal
look at SAM.cpp how it works